Description
Chem-Fix Standard adhesive is a premium quality, polymer modified cement adhesive product for bonding ceramic, marble slate, stone or other rigid materials to sound substrates. They conform to Australian Standard requirements.
Uses
Chem-Fix Standard Adhesive is used to bond ceramic tile or stone paving to all Chemind waterproofing membranes as well as to Sound-Shield Mat acoustic underlay. Used to adhere Sound-Shield acoustic underlay to Chemind Newflex or Aquagard water based rubber membranes. Suitable for CFC, FC, concrete, cement render, block, plaster board and timber in external and internal areas of residential or commercial construction - wet areas, kitchens, balconies, roof decks, pools, ramps, etc.
Features
Grades
Chem-Fix Standard Grey and White.
Typical Properties
|
Water Resistance |
Excellent |
|
Elongation |
Flexible |
|
Pot Life |
1 hour |
Preparation
Concrete and render surfaces to be clean dry, fully cured and free from contaminants. Chemind waterproof membrane should be clean, but is otherwise suitable for direct fix.
Mixing
Add 5 litres water to 20kg bag Chem-Fix Standard powder and mix carefully to a thick, creamy, uniform consistency.
Application
Use an appropriate notched trowel to apply mixed adhesive to substrate. Do not spread more than 1m² at any one time. Press tiles firmly into position before adhesive skins. Ensure that they are well bedded with no voids beneath.
Allow 24 hours drying before flooring is subjected to traffic.
Grouting of tiles or paving can be carried out 24 hours after installation.
NOTE
Non-porous substrates and low temperature will cause longer curing of adhesive.
Coverage
5 – 6 m² per 20kg bag.
Shelf Life
Unopened bags of Chem-Fix Standard will keep for 12 months in a cool dry place.