PYROSLEEVE "Cast-In" Fire Collars

Pyrosleeve "Cast-In" fire collars are manufactured from a high impact plastic casing to house intumescent material which is activated in the event of fire, crushing the plastic pipe and sealing against the passage of flame and hot gases. The intumescent material is unaffected by water or atmospheric influences and industrial environments, and is also resistant to dilute acids, alkalis, paints and conventional construction materials, such as gypsum, lime, cement and adhesives.

Application

Suitable for use in fire rating plastic pipes passing through walls and floors in:

Fire Test Data

Pyrosleeve "Cast-In" fire collars have been tested and approved to AS1530 Part 4, 1997 and AS4072 Part 1, 1992 and can achieve a two (2) hour fire resistance rating in concrete floors.

Product Warranty

All Pyrosleeve "Cast-In " fire collars have a ten (10) year product warranty on the intumescent material contained in the collar.

Pyrosleeve "Cast-In" Features



PYROSLEEVE "TITAN"

The Pyrosleeve Titan fire collar is manufactured from a robust canister which contains Intumex "L". The Intumex "L" intumescent material is slightly raised above the deck to allow for a two hour plus performance. A one part unit designed for cast-in applications, the fire collar will prevent the passage of flames and hot gases penetrating through fire rated floors by crushing the pipe and providing a fire resistant barrier.

Application

The Pyrosleeve "TITAN" Fire Collar has been designed specifically for cast-in applications providing a quick and cost effective alternative for fire rating of plastic pipes.

Recommended for use in:

Pyrosleeve "TITAN" Fire Collars are fully tested and approved in accordance to AS1530 Part 4, 1990 and can achieve a fire resistance rating of up to two (2) hours.

Product Warranty

All Pyrosleeve "TITAN" Fire Collars have a twenty five (25) year product warranty on the intumescent material contained in the fire collar.

Smoke Seal

If a smoke seal is required use Pyropanel Multiflex sealant in accordance with manufacturer's instructions.

Pyrosleeve 'TITAN' Features

Titan 100mm cast in fire collar with 100mm PVC waste pipes passing through.
Pyropanel Cast-in fire collars both designed to take a pipe fitting underneath. The clear plastic see through slab collar is available in 2 sizes (32 to 50mm and 65 to 100mm ) accommodating 3 pipe sizes in each. The Titan Fire collar is available in 6 sizes ranging from 40mm to 150mm.

PYROSLEEVE "RF" Fire Collar

Pyrosleeve "RF" (Retrofit) fire collars are manufactured from a steel casing to house the intumescent material which is activated in the event of fire, crushing the plastic pipe and sealing against the passage of flame and hot gases. The intumescent material is unaffected by water or atmospheric influences and industrial environments and is also resistant to dilute acids, alkalis, paints and conventional construction materials, such as gypsum, lime, cement and adhesives. Pyrosleeve "RF" fire collars are designed to provide up to a four hour fire rating with existing plastic pipework.

Suitable for use in fire rating plastic pipes passing through walls and floors in:

Pyrosleeve "RF" fire collars have been tested and approved to AS 1530 part 4, 1997 and can achieve a fire resistance rating of up to two (2) hours depending on the construction element it is installed in.

All Pyrosleeve "RF" fire collars have a ten (10) year product warranty on the intumescent material contained in the collar.

The Pyrosleeve RF150 fire collar is manufactured from a steel casing to house the intumescent material which is activated in the event of a fire, crushing the pipe and sealing against the passage of flame and hot gases. It is unaffected by water or atmospheric influences and industrial environments and is also resistant to dilute acids, alkalis, paints and conventional construction materials, such as gypsum, lime, cement and adhesives.

The Pyrosleeve RF150 can achieve up to a four-hour fire rating, and is fully tested and approved for use on uPVC, Polyethylene, Polypropylene, HDPE and ABS pipes.


Pyropanel Retrofit collar are available in 3 sizes (32 to 50mm, 65 to 100mm, and 150mm).

The collars are all designed to take a pipe fitting, they are fixed to the underside of the concrete using spike anchors.

The Pyrorap fire collar is available in 7 sizes (25,32,40,50,65,80 and 100mm), they are designed to go around pipe only in a cored penetration or in conjunction with M4 mortar.

PYROSLEEVE "RETROFIT" FIRE COLLAR

Pyrosleeve "Retrofit" fire collars are suitable for use in floors and walls to fire-rate PVC, polyethylene etc pipes when passing through fire compartment walls and floors.

Sizes

RS 20/6 suitable for 225mm NB pipes RS 20/7 suitable for 300mm NB pipes

Fire Test Data

Pyrosleeve "Retrofit" fire collars have been fully tested and approved to AS 1530 Part 4, 1990 and can achieve a fire resistant rating of up to two (2) hours depending on the construction element it is installed in.

Product Warranty

All Pyrosleeve "Retrofit" fire collars have a twenty five year product warranty on the intumescent material contained in the fire collar.

 

Intumescent Wrap

"PYRORAP"- The intumescent wrap for plastic pipe systems.

Pyrorap is on intumescent wrap contained in a plastic bag and is designed to intumesce under fire conditions for nominal bore uPVC pipes from 40-100mm. It is designed for core-hole or block-out applications.

Under fire conditions the Pyrorap will prevent the passage of flames and hot gases penetrating through "fire rated floors and walls" providing a fire resistant barrier for up to four hours.

Application

Pyrorap has been designed especially for core-hole, block-out and retro-fit applications and is a cost effective, labour saving alternative for the fire rating of uPVC pipes.

Recommended for use in:

Fire Test Data

Pyrorap is tested and approved in accordance with AS 1530 Part 4, 1990 and can achieve a fire resistance rating of up to four (4) hours.

Product Warranty

Pyrorap has a twenty-five year warranty on the intumescent material contained in the sealed plastic bag.

Smoke Seal

If a smoke seal is required use Pyropanel "Multiflex" sealant in accordance with manufacturers instructions.

Pyrorap Features

Pyropanel M4 Fire Rated Mortar floor penetration with Pyrorap fire collars around Aeroflex insulated copper pipes and PVC conduits carrying electrical cables to achieve a 2 hour fire rating.